Citation Details


Back to citations


Section: 56.14107a
Date: 06/08/2010
District: NC
Negligence: Low
Injury or Illness: Unlikely
Injury or illness could be expected to be: Lost Workdays or Restricted Only
Significant and Substantial: No

Condition or Practice: The Rainhart Co. laboratory sifter located in the QC lab room did not have the 1/3 hp Dayton motor belt drive guarded from contact. The belt drive was 44" from grade with an opening 14" wide by 15" high on the back side of the unit. The back of the unit was facing the corner. A miner accesses the lab once a week to run samples. This condition exposes miners to lost workday/restricted duty type injuries. The mine operator was aware of the hazard.

Action to Terminate: None suggested on the citation/order. A guard has been installed.

Why this concerns you: At more than one mine the inspectors wanted to know if we had a lab on site. They then proceeded to go directly to our Rainhart mary-ann shakers and pull them away from the wall to look at the backside. This may be a new enforcement initiative.



Abatement Suggestions From Industry


There are no abatements posted for this citation. Add your suggestion below.


Post a Comment


We have provided a place where you can post your professional comment or add additional information regarding this citation. Before doing so, please read the following guidelines:

Be nice!
If you are angry, step back and take a breath.

Post like you are talking to someone face-to-face. Better yet, post it like your mother is going to read it.

Don't discuss anything that might be construed as restraining trade. Nothing about boycotts and we certainly don't want to read about the price of rock.


Be honest!
Keep it factual. There is absolutely no need to exaggerate; some citations are hard enough to believe as is. Mine safety is important and those who visit the site must be able to rely on posts being accurate.


We review all posts
Sorry, but all posts come to us first. We want this site to be effective, and we want you to use it. The site can only be effective if it is legal and professional. If we get something that isn't both, we won't post it. None of us want that to happen.


No Guarantees
Anyone who has been a mine safety professional for long knows what one inspector approves, another may consider a violation. As much as we would like to, we cannot guarantee any solution offered here will work for your situation. We certainly hope what others have done provides helpful ideas, but we aren't willing to bet the farm on it passing an inspection and you shouldn't either.


Your name and email will not be shown when you post your comment. We ask for these fields because it helps us identify association members and keeps spam off the website.

Your Name

Your Email

Member Of

*

Comment


Any comments or opinions shown on this website reflect the views and opinions of the individuals or organization who posted them and do not necessarily reflect the views of any of the parties sponsoring or supporting this website. The sponsors are not responsible for the content of any comment posted on this website.